American Barn With Six Stable Boxes

Sheltered indoor stables with room for six horses.

Image/s for illustration only. The specification may be different to that being offered for sale. Actual specification is detailed below.
Professional Installation Included
  • 4" x 2" (100mm x 50mm) pressure treated CLS framing
  • Pressure treated EX16mm (finished size 12mm) shiplap exterior cladding.
  • Roof boarded with OSB and covered with black Onduline
  • 8' (2483mm American Barn timber door
  • Stables lined to 4' (1.2m with 15mm OSB) with talk grille
  • Stable door with chew strip on the lower door & around the top door surround
  • Clear roof sheet per stable + gable end vents + guttering & down pipes

Horse Barn 6 Stables

Undercover enclosed stabling for up to 6 horses with plenty of room to tack up , muck out and feed all in a covered barn protected from winter (and summer) elements. The American barn includes a large sliding door at one gable end which gives a wide access way for bringing horses, bedding and even a quad inside.  

All loose boxes are 12' x 12' (3.6m x 3.6m) and include OSB kick boarding to 1.2m as well as as talk grilles, lower part stable door chew strips and a clear roof sheet. The barn itself has an OSB boarded roof covered with hard-wearing black Onduline outer roofing, gutter and vents on the gable ends.

Buy online with installation included
23370
4.94 Stars • 96 Reviews
5 Year Workmanship Guarantee
Professional Installation Included
Nationwide Delivery
Free Delivery to South East
Trusted & Recommended
Quantity
Price includes installation. Free Delivery to large parts of the South East - Delivery to other areas will be calculated at checkout.
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
More information
Specification
Dimensions:
10.9m x 10.3m
Exact dimensions will detailed in the base plan which will be sent to you.
This building includes:
  • Pressure treated shiplap exterior cladding.
  • Black Onduline roof, boarded with OSB to give extra support and insulation, supported by 5” x 2” (125mm x 50mm) roof purlins spaced at approx. 24” (610mm) centres and support trusses every approximately 12’ (3.6m) (please refer to base plan for positioning).
American Barn - OTB 2 Standard Features:
  • EX 4” x 2” (100mm x 50mm) pressure treated CLS framing.
  • 7’ 4” (2235mm) to eaves & amp; approx. 12’ 3” (3733mm) to ridge, with a 15° pitch (measured from the top of the concrete to the highest point).
  • Black Onduline roof, boarded with OSB to give extra support and insulation, supported by 5” x 2” (125mm x 50mm) roof purlins spaced at approx. 24” (610mm) centres and support trusses every approximately 12’ (3.6m) (please refer to base plan for positioning).
  • 1 x 8’ (2438mm) wide American barn timber sliding door to the gable end.
  • 10’ (3048mm) walkway down the centre of the building internally.
  • Half round guttering and down pipe to the front and rear, ready to take your water butt or to drain straight into your soakaway.
  • 2 x timber vent to each stable gable end to allow for maximum air flow.

Each Stable Box :

  • Front panels lined with shiplap to 4’ (1.2m) high with galvanised talk grilles above.
  • Lined internally with OSB to 4’ (1.2m) high.
  • Dividing panels between stables lined to 4’ (1.2m) high with OSB and galvanised talk grilles above.
  • 1 x bottom stable door 48” (1219mm) wide x 52” (1321mm) high with an anti-chew bib, furnished including galvanised t-hinges hinges, cabin hooks, pad bolt and kick over latch to each stable.
  • L-shaped galvanised anti chew strips to the top door surround.
  • Clear roof sheets above each stable.
All timber dimensions quoted are un-planed sizes. Finished timber dimensions may vary slightly from this.
Delivery & Access

We offer Free Delivery to large parts of the South East and Home Counties

Delivery is based on postcode areas - our Free Delivery service is limited to the following postcode areas: BN, CT, DA, GU, ME, RH and TN. Delivery to all other areas is calculated at the checkout.

Our vehicles will need to remain on a hard surface at all times and will require vehicular access to within 25 metres of the proposed installation site to transport the materials and install the building as well as a working area of at least 2 metres around the proposed site of the building. We will discuss access with you once you have placed your order, however if you think access may prove difficult, please get in touch.

The Process & Lead Time

When you place your order online, our banking partner captures the charge but it is not taken from your account until we have spoken with you to double check all the details of your order are correct. So once you've placed your order, our experienced team will contact you to run through your order and we will also discuss suitable delivery/installation dates as well as any possible problems regarding access.

Our lead time can be as little as 2 weeks although this can be up to 4-6 weeks at particularly busy times of year. If you have a specific timescale requirement, please get in touch with our team.

Once everything is confirmed with you, we will go ahead and process the payment and send you a detailed base plan. In the case of static buildings (as opposed to mobile buildings on skids), this base plan provides the exact dimensions and layout required for the necessary groundworks. See below for more information.

Groundworks & Installation

We include installation with our buildings. Our professional and dedicated installation team will install your timber building on site. This can take as little as a few hours for a small building, whereas larger buildings can take a couple of days.

Mobile buildings are built on skids, so no groundworks are required, other than a flat and level surface. Mobile buildings include Mobile Stables and Mobile Field Shelters - all other buildings are classed as 'static' buildings.

Our static buildings are designed to be erected and installed on a concrete base with a single course of engineering bricks. The base needs to be complete before the building is delivered and installed. We will supply an accurate base plan which can be passed onto a contractor to lay your base. It's essential that the brick course is laid correctly as this provides the level and stable base for your building and ensures that your timbers are raised off the ground.

We do have an in-house groundworks team that may be able to lay your base, so do speak with our team if this is of interest or you need any help or advice. We also have an online guide to laying a base here.