Specification

Dimensions:

9.1m x 5.4m

Exact dimensions will detailed in the base plan which will be sent to you.

This building includes:

Pressure treated EX19mm (finished size 16mm) shiplap exterior cladding.
Roof boarded with OSB and lined with breather membrane, with a choice of black Onduline roof or Onduvilla (available in shaded red, shaded brown & black).
1 x dividing panel separating the enclosed parking bays and store, lined on one side to eaves and apex with OSB and open studwork to the other.

Store to include:‍

Front panel lined to the exterior with shiplap cladding and open studwork to the interior with breather membrane fitted between the studwork and exterior cladding. Front panel set back approx. 4’ (1.2m) with shiplap cladded return panels, to create a canopy underlined with ply to the front of the store section.
1 x 30” (762mm) wide x 6’ 8½” (2045mm) high personal door, fully furnished to include galvanised adjustable hinges, cabin hook and a key locking throw lock for added security.
1 x 43” (1092mm) wide x 34” (864mm) high pressure treated timber framed window, double glazed with one fixed and one opening pane. (Please note that the design of the windows may differ from those shown on our website due to supplier changes).

Each Enclosed Parking Bay to include:

1 x set of double doors, fully furnished to include galvanised adjustable hinges, drop bolt, tower bolt, cabin hooks and a key locking throw lock for added security, to the front of each enclosed parking bay.

Oak Framed Garage - OTB 3 Standard Features:

4” x 2” (100mm x 50mm) pressure treated CLS framing.
Exterior walls lined with breather membrane, fitted between the studwork and exterior cladding.
Diagonal bracing to the walls for additional strength where necessary.
Oak 6” x 6” (150mm x 150mm) sawn support posts, headers, and curved bracing to the front.
Clearance to the underside of the header approx. 89½” (2273mm).
8’ 1” (2464mm) to eaves with a pitch of 22½° (measured from the top of the concrete to the ridge, including a single course of brick).
Specialist roof trusses to BS, with bottom rail at eaves height, spaced at 600mm centres, wind bracing and metal work.
Guttering and down pipe to the front and rear elevations, ready to take your water butt or run straight into your soakaway.

All timber dimensions quoted are un-planed sizes. Finished timber dimensions may vary slightly from this.

Delivery & Access

We offer Free Delivery to large parts of the South East and Home Counties

Delivery is based on postcode areas - our Free Delivery service is limited to the following postcode areas: BN, CT, DA, GU, ME, RH and TN. Delivery to all other areas is calculated at the checkout.

Our vehicles will need to remain on a hard surface at all times and will require vehicular access to within 25 metres of the proposed installation site to transport the materials and install the building as well as a working area of at least 2 metres around the proposed site of the building. We will discuss access with you once you have placed your order, however if you think access may prove difficult, please get in touch.

The Process & Lead Time

When you place your order online, our banking partner captures the charge but it is not taken from your account until we have spoken with you to double check all the details of your order are correct. So once you've placed your order, our experienced team will contact you to run through your order and we will also discuss suitable delivery/installation dates as well as any possible problems regarding access.

Our lead time can be as little as 2 weeks although this can be up to 4-6 weeks at particularly busy times of year. If you have a specific timescale requirement, please get in touch with our team.

Once everything is confirmed with you, we will go ahead and process the payment and send you a detailed base plan. In the case of static buildings (as opposed to mobile buildings on skids), this base plan provides the exact dimensions and layout required for the necessary groundworks. See below for more information.

Groundworks & Installation

We include installation with our buildings. Our professional and dedicated installation team will install your timber building on site. This can take as little as a few hours for a small building, whereas larger buildings can take a couple of days.

Mobile buildings are built on skids, so no groundworks are required, other than a flat and level surface. Mobile buildings include Mobile Stables and Mobile Field Shelters - all other buildings are classed as 'static' buildings.

Our static buildings are designed to be erected and installed on a concrete base with a single course of engineering bricks. The base needs to be complete before the building is delivered and installed. We will supply an accurate base plan which can be passed onto a contractor to lay your base. It's essential that the brick course is laid correctly as this provides the level and stable base for your building and ensures that your timbers are raised off the ground.

We do have an in-house groundworks team that may be able to lay your base, so do speak with our team if this is of interest or you need any help or advice. We also have an online guide to laying a base here.

Triple Bay Oak Framed Garage With Recessed Store and Garage

Three bay oak fronted garage